Electromechanical Operator For Swing Gates

A MODEL FOR EVERY NEED

Great versatility thanks to the levers that permit installation on large sized pillars, opening up to 125°. Maximum offset 12” (30 cm).

SMART TECHNOLOGY

Control unit compatible with the EELink protocol.

SAFE USE

• This version powered at 24V is specially designed for simpler and faster installation in compliance with latest safety standards.
• Thanks to the antisquashing system, the operator reverses motion and prevents damage to people and vehicles in the event of contact.

SIMPLER INSTALLATION

BFT’s system of coded limit switches makes it possible to reduce the complexity of wiring the low-voltage motors: a single wire is carried to the control panel instead of the three or five normally required, thereby increasing the simplicity and speed of installation. Furthermore, the system is able to automatically distinguish between the open limit switch and the closed one and hence prevent wasted time and wiring errors.

24V DC and 120V AC electromechanical operators for residential use for gate up to 550Lbs and 10Ft.
Incorporated electrical limit switches; Electronic obstruction detection device from the control panel.
Adjustable slow-down on opening and closing.
Opening up to 125 Degrees in 15 seconds.

Technical Features

Control panelLIBRA UL RReversible/irreversible operatorirreversiblePower supply120 V 60 Hz single-phaseAbsorbed power0.05 hp (40 W)Thermal protectionintegratedOpening and Closing Time15 sImpact Reactiontorque limiter integrated in the control panelLockmechanical opening/closingManual Releaserelease knob with personalised keyOperating cycleintensive useEnvironmental conditionsfrom 5°F (-15°C) to 140°F (+60°C)Degree of protectionIP44Operator weight35 lbs (~16 kg)Dimensionssee belowFuse value libra board transformer2A TFuse value libra board logic board1A T