Doorking 6500

The Doorking 6500 or DKS 6500 swing gate operator is designed for residential, commercial and industrial applications for both single and dual-leaf gates. The unique design of this operator allows for easy access
to the electronics and mechanical areas of the operator without ever having to remove the gate arm. This simplifies installation and maintenance. The
electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt driven gear box make this operator one of the quietest vehicular gate operators on the market today.

The Doorking 6500 or DKS 6500 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications for both single and bi-parting gates.   The unique design of this operator allows for easy access to the electronics and mechanical areas of the operator without ever having to remove the gate arm. This simplifies installation and maintenance. The electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt driven gear box make this operator one of the quietest on the market today. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Doorking 6500 or DKS 6500 Swing Gate Openers / Gate Operators
*  Split polyurethane housing allows easy access without having to remove the gate arm!
*  Easy to adjust electronic magnetic limits eliminate old style mechanical switches that can wear out, break or fail
*  Unique breakaway hub design prevents gear box damage if the gate is struck
*  Belt driven gear box for quiet operation
*  Easy to use manual release system
*  Advanced microprocessor control board features programming switches to set the mode of operation required and has ports for DKS plug-in loop detectors
*  Easy bi-parting (dual) gate system connection from one circuit board

Doorking 6500 or DKS 6500 Swing Gate Openers / Gate Operators
ADVANCED FEATURES
Adjustable, no maintenance magnetic limits.
Overlap feature for bi-parting swing gate operation.
Simple connection for secondary operator in bi-parting applications.
Selectable shadow/reverse loop function.
Magnetic lock power provided.
Ports for plug-in loop detectors.
Three 115 VAC convenience outlets.
DC Powered convenience open (optional).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

Doorking 6500 or DKS 6500 Swing Gate Openers / Gate Operators
SPECIFICATIONS
Doorking 6500 Vehicular Swing Gate Operator
Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP).
Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP).   (*Assumes gate swings
level and is in good condition with properly adjusted hardware.   Other external factors may
affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 12-14 seconds.
1/2 or 1 HP continuous-duty motor.
115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve
115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991..   (Note: To be compliant with UL 325 and industry safety
guidelines, additional secondary entrapment prevention devices are required to be installed
with this gate operator.   Your professional DKS system installer can provide you with more
details on these devices and on current industry safety standards.)
Dimensions: 18.375"W x 31.675"H x 23.25"D

‍