FAAC 620

FAAC 620 Hydraulic Barrier Gate Opener
The FAAC 620 is designed specifically for commercial traffic control applications that require
extremely fast opening and closing times. When used with an aluminum beam of 8 1/2 feet or
less, the FAAC 620 has an opening time of under 2 seconds and a 100% duty cycle. The 620 can also
operate a wooden beam up to 16 feet in less than 3 seconds.
* Flexibility - Outstanding flexibility make the FAAC 620  the most complete barrier in its class. The 620
can be equipped with an articulated beam for use under low ceilings and can be outfitted with a
skirt to stop unauthorized entry under the barrier arm.
624 MPS Electronic Control Panel - The microprocessor in the 624 MPS control panel
contains logic that allows it to fully and independently cycle the barrier upon receiving
appropriate signals. It can also be set to follow specific open/close/stop
instructions. Consequently, the barrier can be easily interconnected with other traffic control
devices. The 624 MPS also features an emergency input which, for example, can be connected
to a fire alarm...when the alarm is tripped, the barrier will open and stay open until reset

FAAC 620 Hydraulic Barrier Gate Opener
Specifications
* Duty type - commercial medium-high volume traffic control; standard width entrances
* Duty cycle at 72(F (24(C) 100% motor run time
* Opening time - 2-3 sec (depending on beam length)
* Beam lengths 6 1/2-13 ft (2-4 m)
* Beam types available - rigid, round. articulated, skirted, hinged (breakaway)
* Beam materials available - rigid: aluminum and wood round: aluminum articulated & skirted: aluminum breakaway: aluminum
* Power supply 230 VAC -10% to +6%; 60Hz
* Motor horsepower 1/3 hp
* Motor speed 1400-2800 rpm
* Ambient temperature range -   -13oF to 158oF (-25oC to 70oC)
* Hydraulic locking positions - opened and closed
* Cabinet dimensions (l x w x h) 6 9/16 x 13 3/4 x 42 1/2 in. (17 x 35 x 108 cm)
* Cabinet weight (approx.) 170 lb (77 kg)
* Electric motor - single phase, bi-directional
* Absorbed power 220 W
* Current drawn 1 A
* Pump delivery - 1.58, 2.11, 3.16, 4.22 pt/min (.75, 1, 1.5, 2 l/min)
* Motor winding thermal cutout 248oF (120oC)
* Torque 0-147.5 ft-lb (200 Nm)
* Anti-crush system hydraulic valves (by-pass)
* Mechanical deceleration adjustable
* Casing anti-corrosion treatment cataphoresis
* Cabinet finish polyester paint, powder coated RAL 2004
* Housing protection - IP 55
* Cooling - automatic fan

‍