FAAC 770

FAAC 770 In Ground Swing Gate Operator
Specifications  
* Duty Cycle
* 50 cycles per hour  
* Maximum Gate Swing 120 Degrees  
* 90 Degree Opening time 13 Seconds  
* Maximum Weight per gate leaf 800 lbs. (363 kg)  
* Maximum length per gate leaf 10 feet (3 m)  
* Approx. operating temperature range -4°F to 131°F (-20°C to 55°C)  
* Voltage Primary: 115vac
* Secondary: 2vac (100va transformer)  
* Power Consumption 40 W  
* Current Consumption 2 A  
* Effective Stroke 16.5 in. (41.9 cm)  
* Protection Class Nema 4x

FAAC 770 In Ground Swing Gate Operator
The FAAC 770 Compact automation system for swing gates is a geared motor. It is designed for underground installation
and therefore does not alter the appearance of the leaf. The operators are controlled by an electronic control unit mounted in an
enclosure which assures adequate protection against atmospheric agents.
The leaves are normally closed. When the electronic control unit receives an open command from the remote radio control or any
other control device, it activates the electromechanical system and causes the leaves to rotate by an angle of up to 110° to their
open position, so as to allow access.
If automatic operation has been selected, the leaves close automatically after the selected pause time. If semiautomatic operation
has been selected, a second impulse must be sent to close the leaves. An open command given while the leaves are closing
causes the leaves to reverse direction of movement. A stop command (if available) stops movement at any
time.
For detailed information on the operation of the automation system in the various operating modes, contact the installation
technician. The automation system is equipped with a safety device consisting of photocells. When the photocells are darkened by
an obstacle, they prevent the leaves from closing. The 770 Compact automation system is also equipped with
an anti-crushing safety device (fitted as standard) that limits the torque transmitted to the leaves. The operators ensure that the
system is mechanically locked when the motor is not running, so there is no need to install a lock. The leaves can be opened
manually only by operating the unlocking device. The lamp flashes while the leaves are moving.

‍