Power Master MSW-2000

Power Master MSW Heavy Residential Light Commercial

Swing Gate Operator

24V Control Circuit Solid State Motor Controller Maximum Run Timer 1.5 Second Delay on

Reversing On/Off Power Switch Can be Field Converted to Master/Slave Operation (2 Operators Required)

Pre-wired to Accept 3 Button Station, Radio Control, Reversing Equipment, Loop Detector and Automatic Closing Timer. Will Accept All Types of Access Equipment 3 Button NEMA 1 Control Station Included

For Residential, Commercial or Industrial Swing Gates (Up to 15' Wide or 550 lbs. Max.)

Universal Left or Right Hand Mounting Steel

All Weather Enclosure Designed for Pad or Post Mounting

Hardware Supplied Gate Mechanically Locked in Closed Position

Adjustable Torque Limiting Clutch V-belt and Worm gear Primary Reduction #41 Chain Sprocket Final Reduction

Heavy Duty Arm with Manual Disconnect Positive Cam Actuated Limit Switches

PowerMaster MSW Residential Gate Openers Architectural Specifications:

Supply Model MSW-51 Swing Gate Operator, rated at 1/2 horse power, 115 VAC., 1Ø operator shall be fully enclosed in a heavy gauge steel, weatherproof cabinet, primed and painted to resist corrosion. The cabinet shall have sufficient room inside to mount optional equipment such as heater elements, radio controls, timers and loop detectors. Speed reduction shall be provided by an oil-bath type wormgear speed reducer with an adjustable torque limiting clutch on the output shaft. Final output drive shall be a minimum of 1" diameter steel. For manual operation, the gate arm shall be easily disconnected without the use of tools.

Adjustable limit switches shall be directly actuated from output shaft, and shall not be affected

by removal of motor or by manual operation. The motor shall be of high starting torque, capable of starting or reversing gate from any position. Motor shall be controlled by a solid state switching device and shall be protected from overload by a thermal sensing overload device. An on/off switch shall be provided on control panel for servicing convenience.

Control circuit shall be 24 V and shall provide terminals for field connection of radio controls, obstruction sensing devices, automatic closing timer, three button control stations or single contact control devices. A maximum run timer shall be provided to limit running time in either direction to 28 seconds or less. A delay on reversing shall be provided to reduce shock loading on gate operator. Electrical control panel shall be easily removable for servicing or replacement. Terminal strips shall be provided for connection of all power and control device wiring.

PowerMaster MSW Gate Operators Light Comercial Electrical Specifications:

115V, 1Ø

1/2 HP, Instant Reversing Motor w/Thermal Overload Protection (Max. Cycles per 5-10)

24V Control Circuit Solid State Motor Controller

Maximum Run Timer

1.5 Second Delay on Reversing

On/Off Power Switch

Can be Field Converted to Master/Slave Operation (2 Operators Required)

Pre-wired to Accept 3 Button Station, Radio Control, Reversing Equipment, Loop Detector and Automatic Closing Timer. Will Accept All Types of

Access Equipment

3 Button NEMA 1 Control Station Included

PowerMaster MSW Residential Gate Openers or Operators Mechanical Specifications:

For Residential, Commercial or Industrial Swing Gates (Up to 15' Wide or 550 lbs. Max.)

Universal Left or Right Hand Mounting

Steel All Weather Enclosure

Designed for Pad or Post Mounting, Hardware Supplied

Gate Mechanically Locked in Closed Position

Adjustable Torque Limiting Clutch

V-belt and Wormgear Primary Reduction

#41 Chain Sprocket Final Reduction

Heavy Duty Arm with Manual Disconnect

Positive Cam Actuated Limit Switches

‍