PowerMaster SGI Slide Gate Operators or Openers
Supply Model SGI Slide Gate Operator, as recommended for cantilever, rolling, or overhead sliding gates. Operator to have oilbath type, worm gear
reducer. Final reduction and drive chain to be #50 or larger roller chain. Output shafts minimum 1" diameter, supported by sealed roller bearings.
Provide adjustable torque limiting clutch and solenoid operated brake. Mechanical disconnect by means of lockable handle to follow manual
operation. Adjustable limit switches of the positive chain driven type.
Motor to be high starting torque, continuous duty rated industrial type, protected by thermal or current sensing overload device. Motor must be easily
removable without affecting limit switch settings. The motor controller shall be a full voltage, mechanically interlocked interlocked, across-the-line,
reversing contactor.
The Control circuit shall be 24 VAC with pre-wired terminal strips for field connections. Control circuit will provide for 3 button stations, radio controls,
loop detectors, obstruction sensing devices. The control circuit will also provide for open override, 1.5 second delay on reversing and have provisions
for automatic closing timer and timer defeat switch.
An on/off switch will be provided to disconnect power at electrical enclosure. Slide gate operators will be adaptable to master/slave operation without
any additional components. Right hand mounting is standard, field convertible to left hand mounting. Operator shall be assembled in a primed and
painted 10 gauge weatherproof enclosure for mounting on concrete pad.
PowerMaster SGI Sliding Gate Openers Electrical Specifications:
High Starting Torque Motor
Full Overload Protections
24 VAC Control Circuit
Heavy Duty, Full Voltage, Reversing Contactor
3 Button NEMA 1 control Station Included
On/Off Power Switch
Left/Right Direction Switch
Pre-wired to Accept Radio control, 3 Button Station, 1 Button Station, Loop Detectors, Automatic Reversing Equipment, and all types of Access
Controls
Easily Field Converted to Master/Slave (Two Operators Required)
Delay on Reverse
Maximum Run Timer
PowerMaster SGI Slide Gate Operators Mechanical Specifications:
For Use on Commercial or Industrial Slide Gates (Up to 80' Wide or 2400 lbs. Max.)
45:1 Gear Reducer (Oil Bath Type)
Positive Chain Driven Rotary Limit Switches
Gate Driven by #50 Heavy Duty Roller Chain, Provided with Operator
1" Drive Shaft Supported by Roller Bearing Pillow Blocks
Adjustable Torque Limiting Clutch
Electric Solenoid Operated, Double Shoe Brake
10 Gauge Weather Proof Enclosure
.png){kind=small}
.png){kind=small}
